Al Summan Metals, a well-regarded manufacturer and supplier based in Dubai, UAE, is committed to delivering high-quality Incoloy 800, 800H, and 800HT Bars/Rods. These nickel-iron-chromium alloys are engineered to offer exceptional strength, oxidation resistance, and stability even under high temperatures. They’re recognized for their capacity to retain structural integrity in severe thermal and corrosive environments, which makes them ideal for demanding industrial uses. Al Summan Metals prides itself on its accurate manufacturing methods and rigorous compliance with international standards, guaranteeing that their Incoloy 800/800H/800HT Bars/Rods are fit for use in petrochemical plants, heat exchangers, power generation, and furnace equipment.
The composition of Incoloy 800/800H/800HT Bars/Rods consists of 30–35% nickel, 19–23% chromium, and a balanced blend of iron, together with small quantities of aluminum, titanium, and carbon. The 800H and 800HT grades contain more carbon and regulated amounts of titanium and aluminum, which enhance their creep and rupture strength at high temperatures. These alloys demonstrate remarkable tensile strengths spanning 520–620 MPa and yield strengths of roughly 205–275 MPa, all while retaining outstanding metallurgical stability, oxidation resistance, and longevity under extended heat exposure.
Incoloy 800/800H/800HT Bars Specifications
Specification :ASTM B166, A479 / ASME SB166, SA479
Dimension Standard :EN, DIN, JIS, ASTM, BS, ASME, AISI
Incoloy Round Bars:Outer Diameter spanning from 4mm up to 500mm
Incoloy Bright Bars :Outer Diameter spanning from 4mm up to 200mm
Incoloy Hex Bars :4mm – 101.6mm
Incoloy Square Bars :3mm – 100mm
Incoloy Flat Bars :1/2″ to 10″ with thickness ranging from 1.6mm to 150mm, Custom Size Stainless Steel Flats available
Finish :Black, Bright Polished, Rough Turned, NO.4 Finish, Matt Finish, BA Finish
Length :1 to 6 Meters, Custom Cut Lengths
Form :Round, Square, Hex (A/F), Rectangle, Wire (Coil Form), Wire-mesh, Billet, Ingot, Forging Etc.
| Grade | C | Mn | Si | S | Cu | Fe | Ni | Cr | Al | Ti |
| 800 | 0.10 max | 1.50 max | 1.00 max | 0.015 max | 0.75 max | 39.50 min | 30.00 – 35.00 | 19.00 – 23.00 | 0.15 – 0.60 | 0.15 – 0.60 |
| 800H | 0.05 – 0.10 | 1.50 max | 1.00 max | 0.015 max | 0.75 max | 39.50 min | 30.00 – 35.00 | 19.00 – 23.00 | 0.15 – 0.60 | 0.15 – 0.60 |
| 800HT | 0.06 – 0.10 | 1.50 max | 1.00 max | 0.015 max | 0.75 max | 39.50 min | 30.00 – 35.00 | 19.00 – 23.00 | 0.15 – 0.60 | 0.15 – 0.60 |
| Element | Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| Alloy 800 / 800H / 800HT | 7.94 g/cm3 | 1385 °C (2525 °F) | Psi – 75,000 , MPa – 520 | Psi – 30,000 , MPa – 205 | 30 % |
| STANDARD | WERKSTOFF NR. | UNS | GOST | AFNOR | JIS | BS | EN | OR |
| Incoloy 800 | 1.4876 | N08800 | ЭИ670 | Z8NC32-21 | NCF 800 | NA 15 | X10NiCrAlTi32-20 | XH32T |
| Incoloy 800H | 1.4958 / 1.4876 | N08810 | ЭИ670 | Z8NC33-21 | NCF 800H | NA 15(H) | X5NiCrAlTi31-20 | XH32T |
| Incoloy 800HT | 1.4859 / 1.4876 | N08811 | ЭИ670 | – | NCF 800HT | NA 15(HT) | X8NiCrAlTi32-21 | XH32T |
| Incoloy 800 Round bar | ||||||||
|---|---|---|---|---|---|---|---|---|
| Size | Kgs / Foot | Kgs / Mtr | Size | Kgs / Foot | Kgs / Mtr | Size | Kgs / Foot | Kgs / Mtr |
| 3mm | 0.017 | 0.055 | 20mm | 0.753 | 2.470 | 3″ | 10.900 | 35.762 |
| 1/8″ | 0.019 | 0.062 | 22mm | 0.908 | 2.979 | 3-1/4″ | 12.800 | 41.996 |
| 5/32″ | 0.029 | 0.095 | 7/8″ | 0.926 | 3.038 | 3-1/2″ | 14.850 | 48.772 |
| 4mm | 0.030 | 0.098 | 24mm | 1.080 | 3.543 | 3-3/4″ | 17.001 | 55.780 |
| 3/16″ | 0.043 | 0.141 | 25mm | 1.180 | 3.871 | 4″ | 19.306 | 63.340 |
| 5mm | 0.047 | 0.154 | 1″ | 1.210 | 3.970 | 4-1/4″ | 21.908 | 72.249 |
| 7/32″ | 0.058 | 0.190 | 26mm | 1.271 | 4.170 | 4-1/2″ | 24.4487 | 80.340 |
| 6mm | 0.068 | 0.223 | 27mm | 1.368 | 4.490 | 4-3/4″ | 27.366 | 90.249 |
| 1/4″ | 0.076 | 0.249 | 1-1/8″ | 1.534 | 5.033 | 5″ | 30.461 | 99.940 |
| 7mm | 0.091 | 0.298 | 30mm | 1.691 | 5.548 | 5-1/2″ | 36.690 | 121.000 |
| 5/16″ | 0.118 | 0.387 | 1-1/4″ | 1.924 | 6.349 | 6″ | 43.860 | 143.900 |
| 8mm | 0.120 | 0.398 | 32mm | 1.894 | 6.314 | 6-1/2″ | 51.093 | 167.630 |
| 9mm | 0.152 | 0.498 | 1-3/8″ | 2.303 | 7.550 | 7″ | 59.432 | 196.000 |
| 3/8″ | 0.170 | 0.557 | 35mm | 2.390 | 7.553 | 7-1/2″ | 68.226 | 225.000 |
| 10mm | 0.189 | 0.620 | 36mm | 2.438 | 7.999 | 8″ | 77.586 | 254.55 |
| 11mm | 0.228 | 0.748 | 38mm | 2.792 | 8.903 | 10″ | 121.048 | 397.140 |
| 7/16″ | 0.232 | 0.761 | 1-1/2″ | 2.715 | 8.951 | |||
| 12mm | 0.271 | 0.889 | 40mm | 3.009 | 9.872 | |||
| 1/2″ | 0.303 | 0.994 | 1-5/8″ | 3.200 | 10.449 | |||
| 13mm | 0.318 | 1.043 | 1-3/4″ | 3.712 | 12.179 | |||
| 14mm | 0.368 | 1.207 | 45mm | 3.807 | 12.555 | |||
| 9/16″ | 0.383 | 1.256 | 1-7/8″ | 4.260 | 13.977 | |||
| 15mm | 0.424 | 1.391 | 48mm | 4.330 | 14.205 | |||
| 5/8″ | 0.473 | 1.551 | 50mm | 4.698 | 15.414 | |||
| 16mm | 0.481 | 1.578 | 2″ | 4.848 | 15.906 | |||
| 17mm | 0.543 | 1.791 | 2-1/8″ | 5.475 | 17.963 | |||
| 11/16″ | 0.573 | 1.880 | 2-1/4″ | 6.135 | 20.128 | |||
| 18mm | 0.610 | 2.001 | 60mm | 6.768 | 22.205 | |||
| 3/4″ | 0.682 | 2.237 | 2-3/8″ | 6.838 | 22.435 | |||
| 2-1/2″ | 7.576 | 24.856 | ||||||
| 2-5/8″ | 8.354 | 27.409 | ||||||
| 2-3/4″ | 9.169 | 30.083 | ||||||
Yes, Incoloy 800, 800H, and 800HT bars and rods offer strong corrosion resistance, especially against oxidation and carburization under high-temperature conditions. Thanks to their outstanding resistance to sulfur and other corrosive agents, they are frequently applied in demanding settings like chemical processing and power generation.
Yes, Incoloy 800, 800H, and 800HT bars and rods can be tailored in both size and length to fulfill particular industrial needs. They come in a range of diameters, lengths, and finishes to match various applications.
Incoloy 800, 800H, and 800HT bars and rods deliver outstanding performance in high-temperature settings, retaining their strength along with their resistance to oxidation and carburization. They are well suited for use in furnaces, heat exchangers, and gas turbines.
Incoloy 800/800H/800HT Bars/Rods find extensive use in high-temperature and corrosive environments. They’re well-suited for applications such as heat exchangers, furnace components, petrochemical heaters, and superheaters in power plants. Their outstanding resistance to oxidation and carburization makes them a great fit for industrial furnaces, gas turbines, and thermal processing systems. On top of that, these bars and rods serve chemical processing, refineries, and nuclear facilities. Thanks to their impressive mechanical strength, creep resistance, and corrosion protection, Incoloy 800/800H/800HT Bars/Rods deliver long-lasting reliability even in the most demanding industrial environments.
We supply products accompanied by both mill test certificates and third-party test certificates, guaranteeing the highest standards of quality and compliance.
Al Summan Metals is a leading manufacturer, supplier, and exporter of high-quality bars, rods, and forgings, catering to various industries in Dubai, UAE
Copyright 2024 Al Summan Metals. All rights reserved
