Al Summan Metals, headquartered in Dubai, UAE, has earned a strong standing as a manufacturer and supplier of premium Monel 400 Bars and Rods. By placing strong focus on precision, durability, and customer satisfaction, Al Summan Metals provides products that not only comply with international standards but also address a wide range of industrial requirements. With their cutting-edge manufacturing facilities and a team of experienced professionals, they guarantee that quality and performance remain consistently reliable. Monel 400 Bars and Rods from Al Summan Metals are widely valued for their outstanding strength, corrosion resistance, and dependability, positioning them as the preferred option for industries needing high-quality nickel-copper alloy materials in demanding environments.
These Monel 400 Bars and Rods consist of roughly 67% nickel and 30% copper, together with small quantities of iron, manganese, silicon, and carbon. This solid-solution alloy is recognized for its outstanding resistance to seawater, acids, and alkaline environments. It features a high tensile strength of around 550 MPa, a solid yield strength near 240 MPa, and remarkable toughness over a broad temperature range. Monel 400 keeps its mechanical properties even in extreme cold and intense heat, delivering exceptional ductility, weldability, and corrosion resistance, which makes it ideal for demanding and corrosive industrial applications.
| Standard | ASTM B164, ASME SB164 |
| Round Bar Size | 3mm~ 800mm |
| Square Bar Size | 4mm* 4mm ~100mm* 100mm |
| Flat Bar Size | 2mm ~ 100mm |
| Hex Bar Size | 2mm ~ 100mm |
| Angle Size | 3mm* 20mm* 20mm~ 12mm* 100mm* 100mm |
| Thickness | 50 mm to 6000 mm Long |
| Length | 1 To 6 Meters, Custom Cut Length |
| Form | Round, Square, Hex(A/F), Rectangle, Billet, Ingot, Forging Etc |
| Grade | Ni | Fe | C | Mn | Si | Cu | Al | S |
| Monel 400 | 63.0 min | 1.0 – 2.5 | 0.3 max | 2.0 max | 0.5 max | 28.0 – 34.0 | 0.50 max | 0.02 max |
| Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| 8.8 g/cm3 | 1350 °C (2460 °F) | Psi – 80000 , MPa – 550 | Psi – 35000 , MPa – 240 | 40 % |
| STANDARD | WERKSTOFF NR. | UNS | GOST | AFNOR | JIS | BS | EN |
| Monel 400 | 2.4360 | N04400 | МНЖМц 28-2,5-1,5 | NU-30M | NW 4400 | NA 13 | NiCu30Fe |
Yes, Monel Alloy 400 Bars offer strong resistance to corrosion, particularly in seawater and acidic conditions. Their outstanding resistance to pitting, crevice corrosion, and stress corrosion cracking makes them well-suited for demanding environments.
Yes, Monel 400 rods can be tailored in both size and length to meet particular needs. They come in a range of diameters and lengths to accommodate various industrial uses.
Monel Alloy 400 Bars and Rods deliver strong performance in high-temperature settings, retaining their strength and resistance to oxidation. They can endure temperatures as high as 1,000°F (538°C) without notable deterioration.
Monel 400 Bars and Rods are extensively applied across marine engineering, chemical processing, oil and gas, and power generation sectors. Because they resist seawater and acidic media so well, they are ideally suited for building pump shafts, valves, heat exchangers, and piping systems. Within the aerospace and defense domains, they serve in structural parts that demand a combination of high strength and corrosion resistance. Additionally, these bars and rods play a vital role in desalination plants and offshore platforms. Al Summan Metals’ Monel 400 Bars and Rods deliver enduring performance, dependability, and durability, even under the harshest operating conditions.
We supply products accompanied by both mill test certificates and third-party test certificates, guaranteeing the highest standards of quality and compliance.
Al Summan Metals is a leading manufacturer, supplier, and exporter of high-quality bars, rods, and forgings, catering to various industries in Dubai, UAE
Copyright 2024 Al Summan Metals. All rights reserved
