Al Summan Metals, based in Dubai, UAE, has established a strong reputation as a trustworthy manufacturer and supplier of premium Nitronic 60 Bars and Rods. Known for their accuracy, quality, and reliability, Al Summan Metals delivers high-performance stainless steel products that comply with international standards, meeting demanding industrial requirements. Their Nitronic 60 Bars and Rods are skillfully engineered to deliver exceptional corrosion resistance, wear resistance, and mechanical strength, making them ideal for harsh and high-stress conditions. Through advanced manufacturing methods, rigorous quality control, and timely delivery, Al Summan Metals ensures long-lasting, efficient, and reliable materials, establishing itself as a preferred supplier of specialty stainless steel solutions across UAE and beyond.
Nitronic 60 Bars and Rods represent a high-performance austenitic stainless steel grade, containing approximately 20% chromium, 25% nickel, along with minor quantities of manganese, nitrogen, and silicon that enhance corrosion resistance, strength, and wear properties. From a mechanical standpoint, these bars and rods provide a tensile strength between 750 and 950 MPa, a yield strength of 380 to 520 MPa, and an elongation of 35 to 45%, delivering outstanding toughness, dimensional stability, and resistance to galling and stress corrosion cracking. This distinctive composition ensures remarkable durability and dependability in high-stress, corrosive, and high-temperature environments.
| Grade | Nitronic Alloy 60 (UNS No. S21800) Round Bar |
|---|---|
| Specification | DIN, JIS, ASTM, BS, ASME, AISI |
| Nitronic 60 Square bar size | 4 to 100mm |
| Nitronic Alloy 60 Hollow Bar | 32mm OD x 16mm ID to 250mm OD x 200mm ID) |
| Nitronic UNS S21800 Hex Bar size | 2-100mm A/F |
| Nitronic 60 Angle bar size | 3mm*20mm*20mm~12mm*100mm*100mm |
| Nitronic Alloy 60 Rectangles Size | 33 x 30mm to 295 x 1066mm |
| Nitronic UNS S21800 Flat bar size | Thickness: 2 -100mm |
| Width: 10 to 500mm | |
| Nitronic 60 Channel Bar | 80 x 40mm to 150 x 75mm section; 5.0 to 6.0mm thickness |
| Nitronic UNS S21800 Round bar size | Diameter: 3-~800mm |
| Nitronic 60 Billet Size | 1/2″ to 495mm Diameter |
| Nitronic 60 Surface | Bright, Hot Rolled Pickled, Cold Drawn, Sand Blasting Finished, Polished, Hairline |
| Nitronic Alloy 60 Tolerance | H8, H9, H10, H11, H12, H13K9, K10, K11, K12 or as per clients’ requirements |
| Nitronic UNS S21800 Technique | Nitronic 60 Hot Rolled, Cold Drawn, Cold Rolled, Forged Round Bar, Rod |
| Nitronic 60 Condition | Hardened & tempered, annealed |
| Finish | Cold (bright) drawn, centreless ground, hot rolled, smooth turned, peeled, slit rolled edge, hot rolled annealed, Rough Turned, Bright, Polish, Grinding, Centreless Ground & Black |
| Form | Nitronic 60 Round, Rod, T-Bar, Nickel Alloy Channel Bar, Precision Ground Bar, Nickel Alloy Flat Bar, Nickel Alloy Square Bar, Nickel Alloy Blocks, Nickel Alloy Round Rod, Nickel Alloy Rings, Nickel Alloy Hollow, Nickel Alloy Triangle, Rectangle, Hex (A/F), Nickel Alloy Threaded, Half Round Bar, Profiles, Nickel Alloy Billet, Nickel Alloy Ingot, I/H Bar, Forging etc. |
| Processing | Bar cutting to 650mm |
| Our Nitronic 60 Round bar conforms to NACE MR0175/ISO 15156 | |
| Grade | C | Mn | S | Si | N | Ni | Cr |
| Nitronic Alloy 60 | 0.10 | 7.0 – 9.0 | 0.030 | 3.5 – 4.5 | 0.08 – 0.18 | 8.0 – 9.0 | 16.0 – 18.0 |
| Ultimate Tensile Strength, ksi | 95 |
| 0.2% Yield Strength, ksi | 50 |
| Elongation, % | 35 |
| Reduction of Area, % | 55 |
| Hardness MAX, Brinell | 241 |
| STANDARD | UNS | DIN |
|---|---|---|
| Nitronic 60 Round Bars | S21800 | – |
Nitronic 60 Bar is typically available in finishes such as mill finish, pickled and passivated, polished, brushed, and cold drawn. Each of these finishes offers different degrees of smoothness, resistance to corrosion, and visual appeal.
The most prevalent diameters for Nitronic XM 19 rod extend from 0.125 inches (1/8") up to 12 inches, with common sizes such as 1/4", 1/2", 1", 2", and 3".
Nitronic XM 19 rods are generally available in standard diameters spanning 1/8" to 3", with lengths ranging from 12" to 144". Custom sizes may also be obtainable.
Nitronic 60 Bars and Rods are widely used across industries such as aerospace, chemical processing, marine, and power generation, owing to their exceptional mechanical properties and resistance to corrosion. They are ideal for producing shafts, fasteners, pump components, valves, and structural parts subjected to heavy wear or corrosive environments. Additionally, these bars and rods are employed in heat exchangers, machinery, and equipment where lasting durability, strength, and galling resistance are essential. The combination of toughness, corrosion resistance, and wear performance establishes Nitronic 60 Bars and Rods as a preferred option for demanding engineering applications.
We supply products accompanied by both mill test certificates and third-party test certificates, guaranteeing the highest standards of quality and compliance.
Al Summan Metals is a leading manufacturer, supplier, and exporter of high-quality bars, rods, and forgings, catering to various industries in Dubai, UAE
Copyright 2024 Al Summan Metals. All rights reserved
