Al Summan Metalsis the foremost supplier and manufacturer of Stainless Steel 316L Bars and Rods, providing top-quality products crafted for outstanding corrosion resistance and adaptability. Our 316L Bars and Rods are engineered to perform in marine, chemical, and industrial settings, delivering remarkable durability even under demanding conditions. Thanks to a low carbon content, this grade guarantees excellent weldability and protection against intergranular corrosion. At Al Summan Metals, we take pride in supplying dependable, high-performance stainless steel solutions, offered in a range of sizes and finishes to suit the specific needs of your projects. Your satisfaction is our foremost concern.
Stainless steel 316L bars and rodsare produced with a fairly even chemical makeup to guarantee outstanding performance. These typically contain 16-18% chromium, 10-14% nickel, 2-3% molybdenum, 0.03% maximum carbon and small quantities of manganese, silicon, and phosphorus. This gives improved corrosion resistance, especially against pitting and crevice corrosion caused by chlorides. Mechanically, it delivers a tensile strength of roughly 485 MPa, yield strength of 170 MPa, and elongation up to 40% within a distance of 50mm. A low carbon content improves weldability and reduces carbide precipitation, making it particularly well suited for chemical processing, marine environments, and high-temperature applications.
| Specification | ASTM A276/ A479, ASME SA276/SA479 |
|---|---|
| Grade | Stainless Steel 316L (UNS S31603) |
| Flat bar size | 1/2” to 10” in thickness range of 2mm to 150mm |
| Square bar size | 18mm – 47mm (11/16″ to 1-3/4″) |
| Round bar size | Outside Diameter in the range of 4mm to 500mm |
| Hex Bar size | 18mm – 57mm (11/16″ to 2-3/4″) |
| Bright Bar | Outside Diameter in the range of 4mm to 100mm |
| Channel Bar | 80 x 40mm to 150 x 75mm section; 5.0 to 6.0mm thickness |
| Hollow Bar | 32mm OD x 16mm ID to 250mm OD x 200mm ID) |
| Billet Size | 1/2″ to 495mm Diameter |
| Angle bar size | 3mm*20mm*20mm~12mm*100mm*100mm |
| Rectangular bar Size | 33 x 30mm to 295 x 1066mm |
| Finish | Cold (bright) drawn, centreless ground, hot rolled, smooth turned, peeled, slit rolled edge, hot rolled annealed, Rough Turned, Bright, Polish, Grinding, Centreless Ground & Black |
| Tolerance | H8, H9, H10, H11, H12, H13K9, K10, K11, K12 or as per clients’ requirements |
| Surface | Cold Drawn, Bright, Sand Blasting Finished, Hot Rolled Pickled, Hairline, Polished |
| Condition | Hardened & tempered, annealed |
| Technique | 316L Stainless Steel Cold Drawn, Hot Rolled, Forged Round Bar, Rod, Cold Rolled |
| Processing | Bar cutting to 650mm |
| Section | 3.0 to 12.0mm thickness |
| Form | Precision Ground Bar, Flat Bar, Square, Round, Half Round Bar, Rod, Rectangle, Hex (A/F), T-Bar, Channel Bar,Blocks, Round Rod, Threaded, Profiles, Billet, Ingot, I/H Bar, Forging, Rings, Hollow, Triangle etc. |
| Our 316L Stainless Steel Round bar conforms to NACE MR0175/ISO 15156 | |
| Grade | C | Mn | Si | P | S | Cr | Mo | Ni | N |
| SS 316L | 0.3 max | 2 max | 0.75 max | 0.045 max | 0.030 max | 16 – 18 | 2 – 3 | 10 – 14 | 0.10 max |
| Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| 8.0 g/cm3 | 1454 °C (2650 °F) | Psi – 75000 , MPa – 515 | Psi – 30000 , MPa – 205 | 40 % |
| STANDARD | WERKSTOFF NR. | UNS | JIS | BS | GOST | AFNOR | EN |
| SS 316L | 1.4404 / 1.4435 | S31603 | SUS 316L | 316S11 / 316S13 | 03Ch17N14M3 / 03Ch17N14M2 | Z3CND17‐11‐02 / Z3CND18‐14‐032 | X2CrNiMo17-12-2 / X2CrNiMo18-14-3 |
Stainless Steel 316L includes molybdenum, which boosts its ability to withstand chloride-induced pitting and corrosion, rendering it well-suited for marine and coastal uses.
Yes, the reduced carbon level in 316L limits carbide formation while welding, delivering strong corrosion resistance even within heat-affected zones.
Stainless Steel 316L Bars and Rodsare essential in any sector demanding the highest degrees of corrosion resistance and durability. At Al Summan Metals, we take pride in supplying 316L bars and rods widely used across marine settings, chemical processing, and pharmaceutical equipment where withstanding chloride-induced corrosion holds great significance. Their weldability and low carbon content also make them well suited for heat exchangers, condensers, and piping systems. Beyond fabrication, they serve food processing, architecture, and medical uses such as surgical instruments. The 316L bars and rods are built to meet varied needs, thereby delivering unmatched reliability and performance even under harsh conditions for the success of your project.
We supply products accompanied by mill test certificates as well as third-party test certificates, guaranteeing the highest standards of quality and compliance.
Al Summan Metals is a leading manufacturer, supplier, and exporter of high-quality bars, rods, and forgings, catering to various industries in Dubai, UAE
Copyright 2024 Al Summan Metals. All rights reserved
